Allis Chalmers Parts

Allis Chalmers parts on this page come to about 1,050 listings, and the biggest groups are air filters, then nuts, washers, and bolts and capscrews. Brakes, seats, bearings and ignition parts are smaller groups. Nearly every listing carries a part number, which is what you compare with the number on your worn part.

Part numbers for this brand come in several styles, and some listings name other makes too, so the sections below explain how to search and how to read what you find.

Allis Chalmers Parts List by Type

Air filters are the largest single group, at about 170 listings, and you can browse the wider air filters collection to cross-check a number. Next come the fasteners: about 110 nuts, about 110 washers and about 80 bolts and capscrews. The wider nuts, washers and shims and bolts and screws pages cover every brand if you need to compare a size.

The mechanical groups are smaller but specific. There are 42 bearings, including 16 thrust bearings, 17 double-sealed or double-shielded ball bearings and 7 skid steer bearings, along with 33 grease fittings, about 30 gaskets and 20 seal kits. Thirteen of those seal kits are for lift, tilt, steer or hydraulic cylinders: the listings are the kits, not whole hydraulic cylinders. For lifting and tilting repairs, the combined cylinders, pumps and valves page is the wider place to look, and hose fittings has its own page too.

Operator and body parts include about 30 seats and about 35 paint listings, for example a spray paint in blue. The paint listings are collected with decals and paint for the whole catalog.

Brakes, Ignition and Electrical

When a truck brakes poorly or won't crank, these are the groups to open. There are 32 brake shoe listings, 19 master cylinders and 5 wheel cylinders, and a brake spring sits alongside them. A brake spring appears as "Brake Spring for Case IH A47524 FOR Allis Chalmers 250435," which is a good example of how a single listing can carry more than one number.

On the ignition side there are 6 distributors, 4 distributor caps, 5 condensers, 5 rotors, 4 point sets and 4 ignition coils, plus a single ignition switch. A typical listing is "FOR ALLIS CHALMERS ZS39216326 CAP - DISTRIBUTOR IGNITION." Electrical parts also include 20 controller listings (19 of them controller repairs), 6 contactors and 11 solenoids, one of them a solenoid switch assembly, so a truck that clicks but will not start has several places to look.

Reading Allis Chalmers Part Numbers and Model Codes

There is no single pattern. Many parts use a plain seven-digit number, such as 4911082 on a contactor or 4964895 on a jam nut. Others carry a ZS prefix, like ZS39216326 on the distributor cap and ZS36133655 on a condenser. Dashed numbers appear as well: 3EB-50-26210 and 34A-50-16102 on seats, and 20301-K1290 on an air filter. More than 350 listings include a dashed number, so try the number with and without its dashes.

Where a model code is named, it is usually ACP60, ACP50 or ACP80. ACP60 appears in 11 listings, and the condenser above names the ACP50. Add the code to your search along with the part name. Some fastener listings also give a size, such as M6-1.0 on a hex nut or 1/4-28 on a straight grease fitting, and that size can tell two similar listings apart.

Listings That Also Name Komatsu, TCM and Other Makes

About 40 Allis Chalmers listings name another make as well, and 31 of those name Komatsu. One example is "Forklift Air Filter for TCM, Allis Chalmers, Komatsu 16546-L3200," which lists three makes for one filter. The listing names all three makes, so it can be matched against any of them. Other makes named in these listings include TCM, Nissan, Kalmar, Clark, Toyota, Caterpillar and Baker.

Some engine parts name the engine too. For example, a valve cover gasket for a Mitsubishi 4G52 engine is listed under Allis Chalmers. Where a title names an engine, that engine name can be searched along with the part number.

Repair Listings and Kits

More than 30 Allis Chalmers listings have "repair" in the name, and 19 of those are controller repairs. Open those and read the whole line first, because a repair listing is not the same thing as a new part. Kits overlap with that group: about 39 listings are kits, among them 20 seal kits, 7 repair kits and 4 gasket kits, such as "for Allis Chalmers 4914663, Gasket Kit, For Engine Upper." The rest include a tune-up kit and a horn button kit.

What Tends to Wear on These Trucks

Several of these groups are wear items: air filters clog, brake shoes wear thin, and seals and gaskets start to weep. On a gasoline truck with a distributor, the cap and condenser are the usual ignition suspects. None of that replaces a proper inspection, because the part that looks bad is sometimes the victim of a different fault. Compare the old part with the listing, and check the bolts, nuts and washers that hold it in place while you have it out.

Small mechanical parts are listed too, among them pipe plugs, grease fittings, hose clamps, thrust bearings and Woodruff keys. A listing such as "For Allis Chalmers Bearing - Thrust 2048293" gives both the name and the number, so a search can use either one. Hose clamp listings state the range they close to, so measure the hose before you choose one.

Aftermarket Allis Chalmers Replacement Parts

More than 850 of these listings begin with "For Allis Chalmers." That wording marks a part built to fit Allis Chalmers machines, rather than one built by the original maker. We list the maker's name and number as a reference so you can match what's on the truck. The same applies to the Komatsu and TCM names you'll see in some titles.

Allis Chalmers Parts FAQ

How do I search this brand?

Start with whatever is stamped or printed on the old part. A search that returns nothing may just need the dashes added or removed, or the part name paired with a model code such as ACP60.

Where do the parts ship from?

Orders leave our warehouse in Franklin Park, Illinois. The business itself has been running since 2005.

Can I check the seller's record?

Yes, if you want a third-party view. Look up ouroverstock, our eBay account, which has been selling since 2004. It carries the Top Rated Seller badge, and positive feedback stands at 99.9% across more than 200,000 sales.

Do the listings say what size a fastener is?

Some do. All 33 grease fittings give their thread and about half of the washers give a size, but most nuts and bolts name only the type, such as hex or jam, so measure your old fastener and match it.