-
For Gehl Bolt 187503 -
For Gehl Band/Clamping 187173 -
For Gehl Bolt - Hex - M16-2.0 X 40MM 181502 -
For Gehl Bolt - Hex - M16-2.0 X 40MM 180096 -
For Gehl Nut - Hex (M6-1.0) 135496 -
For Gehl Nut - Hex (M6-1.0) 656047 -
For Gehl Nut - Hex (M6-1.0) K0205650060 -
For Gehl Washer - Lock 133111 -
For Gehl Screw - M8 20 HE FLANGE 8.8 182158 -
For Gehl Nut - Jam 133148 -
For Gehl Capscrew Socket Head 651516 -
For Gehl Bolt-Flange 105288 -
For Gehl Washer 7451680116 -
For Gehl Fitting - Grease 1/4-28 90 Degree 076002 -
For Gehl Fitting - Grease 1/4-28 90 Degree L10057 -
For Gehl Bolt-Hex 105289 -
For Gehl Washer - M14 18 COPPER SEALNG 7593641021 -
For Gehl Washer - M14 18 COPPER SEALNG 163756 -
For Gehl Washer - M14 18 COPPER SEALNG 104607 -
For Gehl Plug-Glow 193269 -
For Gehl Bolt/Torque 187231 -
For Gehl Bolt/Torque 133236 -
For Gehl O-Ring 187223 -
For Gehl O-Ring 133250 -
For Gehl Spring/Compression 133416 -
For Gehl Bolt - Hollow 133141 -
For Gehl Plug 133149 -
For Gehl Plug 133143 -
For Gehl Plug 133140 -
L99170 SEAL KIT - ROTATE FOR GEHL -
For Gehl Screw-In Nipple 133478 -
For Gehl Ring/Sealing 133440 -
FOR GEHL SEAL KIT - STEERING CYLINDER L99430 -
For Gehl Washer 133132 -
For Gehl Washer - Profile 133431 -
For Gehl Nozzle/Piston 133417
Most Gehl skid steer parts that wear out are small ones: a gasket, a grease fitting, a jam nut, a hose clamp. This page lists 95 of them, plus a few larger pieces such as starters, pumps and a brake disc. Each listing carries a Gehl part number you can match against the one on your old part.
Nearly all of these are aftermarket. A listing that begins "For Gehl" describes a replacement built to suit Gehl machines, not something Gehl made, and the name is there so you can find the right number. If you want a genuine OEM part instead, call us on (708) 507-0707 and ask what is available.
Gehl Skid Steer Parts by Type
Hardware makes up the biggest share. There are 12 bolts, 12 nuts and 11 washers, and nine of the nuts are jam nuts, as in "For Gehl Nut - Jam 180518." Seven gaskets and six plugs come next, followed by five grease fittings and four capscrews. If you need more of the same hardware for other machines, the wider forklift bolts, forklift nuts and forklift washers pages list thousands.
On the engine and fuel side, you'll find three starters and three pumps, two of them fuel lift pumps and one a water pump. Three of the seven gaskets are head gaskets, one more is an intake manifold gasket, and there is one injector. A few examples show the range: "For Gehl Head Gasket 133575," "For Gehl Pump - Fuel Lift F4L1011F 133462" and "FOR GEHL SEAL KIT - STEERING CYLINDER L99430." For wider choice, try the forklift starters page or the engine parts page.
Three O-rings, three clamps and three seal kits round out the leaks-and-hoses group, and two of the clamps are hose clamps. Two more listings are springs. Once you know which system the leak or noise is coming from, forklift seals and hose fittings are the two places to compare against what you see here.
Reading Gehl Part Numbers
The simplest pattern is a plain six-digit number after the part name, such as 133151 on a screw plug, 187209 on a hex bolt or 133146 on a jam nut. Search it exactly as written. A few numbers carry other forms: an L before the digits (L10465 on a grease fitting, L99430 on the steering cylinder seal kit), a dashed number like 425-34387 on another jam nut, and three ten-digit codes, among them 0009937228 on a hose clamp.
Sometimes the number you hold belongs to another company's catalog, so try the Gehl number from the listing first and the other one second. A starter switch key, for example, is worded "FOR Cat FOR Gehl" and carries both 073694 and 6T2663. Two listings name another make like this, and the Caterpillar forklift parts page is the one to check if yours does too.
Sizes Worth Checking Before You Order
Hardware is where a size in the listing saves you a wrong order. The five grease fittings are all 1/4-28, three of them described as "1/4-28 Straight," with numbers L10465 and 570019 among them, and two as 90 Degree. Metric fasteners are named too: M6 on five listings, M14 on three and M16 on two, such as "For Gehl Capscrew M6-1 X 60 PT 133165." Hose clamps give their range, for instance "2 1/2 - 3 1/2 INCH," so measure the hose before you compare.
Flat washers list their dimensions ahead of the number ("For Gehl Washer Flat .31 .38 .88 .083 138515"), and the copper sealing washers show "M14 18." A shim is sized in millimeters: "For Gehl SHIM .45MM 133418." Hold the old washer or shim next to those figures, because the Gehl number alone won't tell you the thickness.
Brake Discs, Filters and Other One-Offs
A few listings stand alone. "for GEHL 104643 - NEW Gehl Friction Brake Disc" is one of five that say "new" in the wording. "REPLACEMENT AIR FILTER FOR GEHL L259503" is the air filter, and "For Gehl Tie Rod Articulated 106076" is a steering part. If you run other skid steers, the skid steer parts page covers more makes.
Since 2004 many buyers have known us as ouroverstock on eBay, where we're a Top Rated Seller with more than 200,000 items sold and 99.9% positive feedback. The same catalog behind those sales is what you're browsing here.
Gehl Parts FAQ
What if my Gehl number isn't listed?
The page holds 95 listings, so a missing number is likely. Try the number with and without spaces, then try the part name plus the size. A different make's number on the same part can also appear in the wording, as on the "For Cat" starter key.
Which Gehl listings are kits?
Four of the 95 say "kit" in the wording, and the steering cylinder seal kit L99430 is one. Three of the four are seal kits. Read the wording before you order, since a washer or nut is described by its own number.
Do any listings cover Gehl engines?
A few name engine-related parts. The fuel lift pumps, the water pump, the head gaskets, the injector and the glow plug are the ones to open. Check each against your engine before you order.