-
FOR Genie 7-200-139GT, 7-200-139 -NEW FOR Genie 4Way Controller / Joystick -
for Genie 36867GT, 36867 - NEW Genie Z20 Z25 Joystick / Controller -
FOR GENIE CONTROLLER - JOYSTICK MS4 STYLE 42032 42032GT -
FOR GENIE GRC-12 DECAL - JOYSTICK DIRECTIONAL 137656 137656GT -
for Genie 23680, 23680GT, Switch, For Joystick Steering -
for Genie Terex Marklift Joystick Controller 69142 -
Genie GS-1530 SWITCH, JOYSTICK ENABLE 235463 - (KIT) (ANABLE AND STEER) -
FOR GENIE GR-15 JOYSTICK HANDLE SET, COMPLETE Part # 97014 -
for GENIE JOYSTICK CONTROLLER 29643, 29643GT -
FOR Genie Joystick Controller Part # 40612 - New -
FOR Genie S-40 Joystick Axis Boot 139598 -
FOR Genie 129080 Joystick Replacement Kit -
for GENIE Z-20/8 BOOT, JOYSTICK ROCKER 43038 -
FOR GENIE GR-12 TURN SWITCH ACTUATOR (JOYSTICK) 105109 -
FOR GENIE 21417 GASKET-JOYSTICK -
FOR GENIE JOYSTICK BOOT FOR 101174/101175/101005 PART# 62394 -
FOR GENIE GR-8 - GASKET-JOYSTICK 52529 -
FOR GENIE Z-20/8 MICROSWITCH, JOYSTICK 19712 -
FOR GENIE CONTROLLER - JOYSTICK MS4 STYLE 56579GT -
FOR GENIE HARNESS JOYSTICK ADAPTOR FOR 111415/111416/111417 119613GT -
FOR Genie GS-3246 BOOT SWITCH JOYSTICK AXIS 229092 -
FOR GENIE 27516GT, 27516, CIRCUIT BOARD - LIFT FOR 53073 JOYSTICK -
FOR Genie 39612GT, JOYSTICK DECAL(GEN 1), GS1930 -
FOR GENIE JOYSTICK-5K-0 OHM-W/RELAY 234923 234923GT -
FOR GENIE GR-12 BOOT, JOYSTICK ROCKER 97015 -
FOR Genie S-40 Joystick Rocker Boot 75443 -
FOR GENIE Z-20/8 SWITCH, JOYSTICK STEERING 19722 -
FOR Genie 22368GT, 22368 - NEW FOR Genie Joystick / Controller Boot -
FOR Genie 52591GT, 52591, Potentiometer, For Joystick -
FOR Genie GR-20 COIL CORD ASSY-GS JOYSTICK 144065 -
FOR GENIE 62392, 62392GT KNOB - JOYSTICK FOR 101174/101175/101005 -
FOR Genie GS-2032 BOOT, JOYSTICK ROCKER 229093 -
FOR GENIE GRC-12 BOOT - JOYSTICK 214544 214544GT -
FOR GENIE GRC-12 CONTROLLER - JOYSTICK GEN 6 137634 137634GT -
for GENIE 150157 SWITCH KIT - JOYSTICK -
for GENIE GR-20 BOOT - JOYSTICK ENABLE SWITCH KIT 105171
A joystick that sticks, drifts or goes dead can park a scissor lift or boom until it's replaced, and the part you need may be as small as a rubber boot or as complete as a controller. This page holds 103 Genie lift joystick listings: joystick controllers, boots, enable switch kits, cord assemblies and a few full joystick assemblies. Most are worded "FOR GENIE" and then give a part number, which is the surest way to compare them with the one you're removing.
Those listings are aftermarket parts built to suit Genie machines. The word "Genie" says what the part is meant for, and Genie is not the maker. If you'd rather have a genuine OEM joystick, phone (708) 507-0707 and ask what is available.
Genie Lift Joystick Controllers, Boots and Kits
Controllers are the biggest group: 37 listings mention a controller, and all but six of them are the joystick controller itself, as in "for Genie Joystick Controller - Part # 57890 - New." The other six are three control cards, two boots and a decal. Another 20 name a boot, the covers that sit over the joystick (two of those are the controller boots just mentioned), and 14 name a switch or switch kit. Nine listings are kits in all, such as "FOR GENIE KIT-HANDLE - JOYSTICK 130746" and the enable switch kit 105171.
Several smaller pieces are listed on their own. There is a coil cord assembly (144065) for a GR-20, a joystick harness adapter (119613) and a joystick with a relay (234923). If only one of these has failed, you may not need the whole joystick controller.
Matching the Joystick Style
When part numbers look alike, the style word in the listing is the quickest tiebreaker. Joystick controllers are named by type: "ITT STYLE (9 WIRE)" for 78903, "JS5 STYLE" for 34419, "MS4 STYLE" for 56773 and "GEN 6" for 137634. Compare that label with what's on your machine before you look at the model.
The axis count is spelled out when it matters. 78903 is a "Single Axis Joystick / Controller," 111415 is "1 AXIS" and 105175 is a "DRIVE/STEER JOYSTICK." If you're replacing the stick that both drives and steers, the drive and steer wording is the one to look for. Listing 27524 is a joystick controller card for that "(Drive & Steer)" setup.
Joystick Parts by Genie Model
Seven of the listings name a GR-20 (one is a GR-20J) and seven name a Z boom, six for the Z-20/8 and one for the Z20 and Z25. Six name the GR-12, five the GR-15, four the GS-2032 and three the GRC-12. The same part often serves several machines. Boot 97013 is listed for a GR-15, a GR-12 and a GR-20, so if one model's search comes up empty, search the number.
Boots are specific to the stick. "Genie GS-2032 BOOT, JOYSTICK AXIS 214544" and "FOR Genie GS-2032 BOOT, JOYSTICK ROCKER 229093" are different parts for the same model, and the S-40 has a rocker boot of its own (75443). Pick the one that matches the control you're replacing: axis, rocker or enable switch.
Other Genie Controls and Wider Joystick Pages
Joystick controllers sit within a bigger group of Genie controllers, which has about 90 listings. To see joysticks for other makes, the forklift joystick page lists about 315. If a label on the control box is worn, the Genie lift decals page has around 585. The full range is under Genie parts, with about 4,600 listings.
Genie Joystick FAQ
Does every Genie joystick listing name a model?
No. Many name a model code, but others give only the part number. Treat the number as the match and the model as a second check.
Can I buy only the boot?
Yes. About 20 listings are boots, covering axis, rocker and enable styles.
Why do some numbers appear twice in a listing?
Many show a number plain and again with GT on the end, as in 137634 and 137634GT. Search the digits alone to find both.