Deutz Parts

Washers, nuts and bolts are the largest groups among the roughly 320 Deutz parts in this collection, but the same range also covers gaskets, starters, O-rings, switches and a few fuel system parts. Most listings are written around an engine part number. Everything here is aftermarket, made to fit Deutz engines rather than made by Deutz.

Some listings name a machine as well as the engine, which is how Deutz parts also turn up for Genie, JLG and Gehl equipment. The sections below cover each group, how to search the numbers, and where the lift and skid steer listings fit.

Deutz Parts List by Type

Fasteners lead the range. There are about 50 washers, 40 nuts and 38 bolts, along with 21 screws, 17 plugs and 3 screw plugs. They're covered in detail in the next section, because the small differences between them decide whether you order the right one.

Engine and fluid parts come next: about 22 gaskets, 12 O-rings, 6 hoses and 5 air filters, plus 3 seal rings. On the fuel side, there are 8 pump listings: 5 lift pumps and 3 injection pumps. Starters number 16, and electrical items include 9 switches, 3 sensors and 3 solenoids. At the small end are 4 pushrods, 3 glow plugs, 3 valve collars, 3 valve tappets, 2 belts and 1 fuel injector.

If you need a broader selection, the washers and shims page holds about 3,500 parts, nuts more than 3,200 and bolts, screws and studs more than 4,500. The Deutz list is the place to start when you want the Deutz reference number itself.

Washers, Nuts and Bolts

The washer listings are the most varied. Eight are copper sealing washers, such as "For Deutz Fahr Washer - Copper Sealing 01118693," the kind that sit under a hollow bolt or plug. Ten give a size, "7.5MMX16MMX1MM," and about 17 are flat washers described by thickness and bore, like "Washer Flat .31 .38 .88 .083 01107098."

Nuts are mostly jam nuts, about 30 of them, listed as "Nut - Jam 01112824," "Nut -Jam 01178397" and so on. Bolts and screws come in several styles, including hex bolts ("Bolt-Hex 1181433"), flange bolts ("Bolt - Flange 01181416"), sems screws and hollow screws. Metric sizes such as M6-1.0, M12 and M14 appear in a handful of titles, so read the thread size before you order.

Gaskets, O-Rings and Seals

Engine sealing parts are named by where they go. Examples are "Gasket - Valve Cover 04271076," "Seal - Valve 04153728" and "Cover - Camshaft 4178895." There are about 22 gaskets and 12 O-rings in the range, plus 11 more listings with seal in the name. Compare the number first and the shape second, since sealing parts of similar size are easy to mix up.

For wider selection, see seals, gaskets and O-rings, which holds more than 2,600 parts, or engine parts and overhaul kits, with about 2,000.

Starters, Valves and Pumps

Some starters are worded by tooth count and condition. Three name an 11 tooth starter, one of them reading "NEW FOR Genie Deutz 11 Tooth Starter," and nine mention "STARTER-NEW." If you're matching a starter, check the tooth count in the listing as well as the number. Browse all makes on the starters page, which has about 490.

None of the valve and pump listings here say hydraulic, so they are engine parts. There are overload valve plugs ("Plug - Overload Valve 01131075"), valve collars and tappets, pushrods ("Pushrod 02109085"), and 8 fuel pumps. For the hydraulic side, the hydraulic valves page holds about 1,100 parts, the hydraulic pumps page about 1,150, and switches, including "Fahr Switch Engine Oil Temperature 01173672," are on the switches page, about 1,500. One turbocharger is also listed ("Turbocharger 7027240").

Reading Deutz Part Numbers

Deutz numbers are mostly seven or eight digits, and many start with a zero. The same part can show up with and without it. An O-ring is listed as "For Deutz O-Ring 1164748" and as "For Deutz Fahr O-Ring 01164748," and a plug appears twice as 01131075. If one search comes up empty, drop the leading zero or add it back.

The name varies as well. About 70 listings say "Deutz Fahr," and the rest say plain "Deutz." A search on one name can miss listings under the other, so lead with the number. Engine models are named sparingly: F4L1011F appears in 6 listings and F1011F in 3.

Deutz Parts in Genie, JLG and Gehl Machines

About 24 of these listings are also on the Genie parts page, with 4 on JLG and 1 on Gehl. They name the machine first and the engine second, for example "GENIE 37033, 37033GT SENDING UNIT OIL OIL PRESS. DEUTZ" and "JLG 7020458 SOLENOID - DEUTZ FUEL."

One V-belt listing names several Genie boom models at once: S60, S65, S60X and S60XC. If you run a lift with a Deutz diesel, try the Genie or JLG number first, then the Deutz number.

Fuel, Oil and Air Parts

Parts that feed the engine are spread across the range. About 12 listings mention fuel, 11 mention oil and 5 are air filters, such as "DEUTZ AIR FILTER 42484724" and "FOR Deutz Air Filter 1319141." A fuel solenoid for a JLG appears as "7020458 SOLENOID - DEUTZ FUEL," and an oil pressure sending unit appears under the Genie number 37033.

LPG hose is sold by length. Six listings are LPG, and the one shown is "For Deutz Hose - LPG (SOLD BY THE FOOT) 1398326," so the quantity you order is the number of feet. Pressure items turn up in 7 listings, and caps (8 listings) and tees (5) are there as well.

Deutz Parts FAQ

Do you sell Deutz replacement parts or Deutz spare parts?

Both words describe the same listings. Everything on the page is an aftermarket replacement made to fit Deutz engines, and we ship across the United States to repair shops, fleet managers, rental yards and equipment owners.

Where is the Deutz parts catalog?

This page is the working list. Every part carries its number in the listing, so you can search by number directly or browse the groups above.

Why does my number have an extra zero?

Many Deutz numbers begin with 0, and not every listing keeps it. Try both forms.

When can I call about a part?

We take calls at (708) 507-0707, Monday to Friday, 8:00 a.m. to 4:00 p.m. Central. Have the engine number or the part number ready.